Cutting Machine Hand Gloves Whiting Davis
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Stitch Spares

Cutting Machine Hand Gloves Whiting Davis

Secure
Available: In Stock
Rs. 3,500.00
Incl Taxes

Cutting Machine Hand Gloves Whiting Davis Use for Garment Manufacturing Unit

THREE STEP REVERSIBLE DESIGN

Step 1 Slide the buckle off the strap.

Step 2 Insert hand into glove. As you remove your hand from the glove pull on the fingers to turn the glove inside out (using a “shaking” motion after removing your
hand).

Step 3 Slide the buckle back on
the strap.

Whiting + Davis products are not CE certified, but are manufactured following the European Standard of EN1082; section 6.4.1 states:
“Smoothly and progressively apply a force that pulls the rings apart as it rises from 0 N to 100 N (22½ pounds of force) over a period of 2 to 10 seconds. Report all instances of rings or plates opening or breaking at a force of below 100 N.”
*N(Newton) = .225 pounds of force Whiting+ Davis products, and Whiting + Davis products manufactured by Chainex have always exceeded the European Standard.

PRODUCT FEATURES:- 

• Five finger mesh glove, side cuff slit for easy donning and doffing of glove
• Individually welded stainless steel rings
• Gloves are 4-ring joined at the seams to prevent gaps an knife sticks
• Thumbs are attached with 3 ring join, for the strongest seam at a high wear area
• Ergonomic design is comfortable to wear and diminishes sagging mesh
• Gloves are ambidextrous following the 3 Step Reversible Design

 

 

 

Cutting Machine Hand Gloves Whiting Davis Use for Garment Manufacturing Unit

THREE STEP REVERSIBLE DESIGN

Step 1 Slide the buckle off the strap.

Step 2 Insert hand into glove. As you remove your hand from the glove pull on the fingers to turn the glove inside out (using a “shaking” motion after removing your
hand).

Step 3 Slide the buckle back on
the strap.

Whiting + Davis products are not CE certified, but are manufactured following the European Standard of EN1082; section 6.4.1 states:
“Smoothly and progressively apply a force that pulls the rings apart as it rises from 0 N to 100 N (22½ pounds of force) over a period of 2 to 10 seconds. Report all instances of rings or plates opening or breaking at a force of below 100 N.”
*N(Newton) = .225 pounds of force Whiting+ Davis products, and Whiting + Davis products manufactured by Chainex have always exceeded the European Standard.

PRODUCT FEATURES:- 

• Five finger mesh glove, side cuff slit for easy donning and doffing of glove
• Individually welded stainless steel rings
• Gloves are 4-ring joined at the seams to prevent gaps an knife sticks
• Thumbs are attached with 3 ring join, for the strongest seam at a high wear area
• Ergonomic design is comfortable to wear and diminishes sagging mesh
• Gloves are ambidextrous following the 3 Step Reversible Design